What information does a forklift data plate provide? What is a forklift data plate? A forklift data plate is mounted on the forklift body and includes important information like the weight, fuel type, and overall
What information does a forklift data plate provide?
What is a forklift data plate? A forklift data plate is mounted on the forklift body and includes important information like the weight, fuel type, and overall forklift load capacity. A forklift data plate is sometimes called a capacity plate or a forklift nameplate.
What information is required on the lift truck data plate?
The data plate includes vital information about the forklift, such as its fuel type, weight, and forklift load capacity. To ensure safe usage of your forklifts, it is necessary to have employees read the data plate thoroughly during training and before use.
Where is the forklift data plate?
The forklift data plate can be found on the instrument panel near the operating controls. It is the responsibility of the operator to understand the capabilities of each forklift and to properly maintain the data plate to ensure it is legible and complete.
What are the 3 most important pieces of information found on a capacity plate?
Sometimes referred to as a capacity plate or a forklift nameplate, the forklift data plate includes important information such as weight, fuel type, and forklift load capacity.
How is forklift capacity calculated?
A couple of simple calculations are all that’s necessary:
- Divide the load center as stated on the data plate by the actual load center (in the example above, that would be 24/36=. 6666).
- Multiply this result by the rated load capacity (4000X. 6666=2666.6).
How do you read a forklift plate?
How to Read a Forklift Data Plate
- Forklift Model. The forklift model the rating plate is attached to is clearly stated at the top of the plate.
- Forklift Serial Number.
- Year of Manufacture.
- Nominal Power.
- Truck Weight.
- Forward Back Tilt.
- Tyre Information.
What else on a data plate determines how much the truck can pick up?
Using the Data Plate to Determine Your Forklift’s Maximum Capacity. The forks, mast, carriage and any attachment(s), on your forklift each have individual rated capacities. If you have a forklift with a 10,000 lb.
How much can a lift truck with this capacity data plate handle?
Forklift capacities range from about 3,000 lbs up to more than 70,000+ lbs. You can find the rated capacity of a forklift on its data plate. OSHA requires “only loads within the rated capacity of a truck shall be handled.” It’s easy to think the rated capacity is the same as maximum capacity, but it’s not that simple.
What are the conditions for a boat’s capacity plate?
Federal law requires single-hull boats less than 20 feet in length to have a capacity plate. (However, PWC and sailboat manufacturers are not required to attach a capacity plate.) Always follow the recommended capacity found in the owner’s manual and on the manufacturer’s warning decal.
How much can a forklift pick up?
Which steps must be done daily before using a forklift?
Check fluid levels (oil, water, and hydraulic fluid, for example) Check for leaks, cracks and visible defects everywhere on the forklift. Check mast chains visually; avoid the use of hands.