How much does a pine ceiling cost?

How much does a pine ceiling cost?

Material cost: Prices vary widely, depending on species and provenance, but expect to spend anywhere from $5 to $20 and up per square foot. (Labor and installation will add to the cost of all materials mentioned in this article.)

Is pine wood good for ceiling?

Pine Wood Ceiling offered comes in quality construction finish and provides for beautiful looks as well as lasting durability.

What type of wood is best for ceilings?

Plain Sliced/Plain Sawn Flat Grain Woods available in this style include red oak, white birch, white oak, white maple, beech, cedar, black walnut, poplar, white fir, carbonized bamboo, cherry, white ash, flat grain hemlock, alder, khaya mahogany, ipe and flat grain Douglas fir.

How much does a shiplap ceiling cost?

Shiplap Costs Shiplap wood prices range between $2.50 and $7.00 per square foot for real boards. On average, shiplap interior installation costs $1,000, with most homeowners spending between $500 and $1,500 for one room.

Is Knotty Pine expensive?

“There’s knotty pine and clear pine and the clear is quite expensive,” reports Bob Laurie of L.L. Johnson Lumber in Charlotte, Mich. “When people want knotty pine, they usually want to purposely incorporate knots and they need the knots to be tight and sound. It’s in demand and it’s under a dollar a foot.

Can Plywood be used for ceiling?

Plywood is viable as a ceiling material, particularly in the basement. Plywood allows easier access to pipes, ducts and wiring than drywall. Plywood serves capably as ceiling material in garages, shops and rec rooms when aesthetic design is not an issue.

What should I stain my pine ceiling with?

Early American Is a Classic Favorite. You just can’t go wrong using Early American stain on your pine paneling and trims. Oil-based stains, such as Minwax Wood Finish, enhances pine’s grain and colors and can do it with just one heavy coat.

Is pine wood furniture durable?

Stiffness: Pine is a very stiff wood. This makes it durable and strong when used in furniture. It’s not quite as strong as oak, but it does still offer durability.

What type of plywood is used for ceilings?

Fir is the most affordable type of plywood. Plywood is viable as a ceiling material, particularly in the basement.

Is plywood good for ceiling?

It is perfect for walls, ceilings, kitchen countertops, bathroom cabinets, floors and outdoor shed. A leaky roof usually wets ceilings. If the ceiling is made from plywood, water is easily absorbed by the wood and soon goes through it causing slippery floor. That keeps the ceiling solid for a long time.

What is cheaper shiplap or tongue and groove?

Shiplap is cheaper than tongue and groove, but it requires a bit more work on the carpenter to get the rows to lay flat against the building in a waterproof fashion. Also, if not installed properly, shiplap is more likely to warp and leak than its counterpart.

How much does it cost to install wood ceiling?

According to the material you choose it can run anywhere from $2.00-$3.50 per square foot. It comes in many different wood species like knotty pine, clear pine, cedar, and redwood.

How much does it cost to install a pine ceiling?

Based on quotes from my local suppliers, a pine V-joint wood ceiling would cost you about $1,700 in materials (with 5% waste factored for cutting) and take a crew of 3 workers (one cutter, two installers) approximately 1.5 to 2 days to complete.

How big is a southern pine wall and ceiling?

*Knotty #2&Btr. grade Southern Pine *Full 1” Thick *Full width too so 1×12 is 12” wide *There’s some size variance… Makes great rustic walls, ceilings, or even floors.

How much does knotty pine paneling cost per sq ft?

Knotty Pine Paneling. At only $1.08 a sq. ft., our Knotty Pine Paneling is tongue-n-groove and end-matched (tongue-n-groove on the ends!) for zero-waste. Sold in 220 Sq. ft. packages to make ordering easy!

How much does it cost to finish a ceiling with drywall?

Finishing a ceiling with drywall would cost about $500 in materials for drywall, tape and mud compound. It would take two workers between a half-day and a day to install the drywall, one worker 3 days to do 3 coats of mud, and 1 day of sanding. That’s a total of about $2,400 for material and labour, but you haven’t applied paint yet.