# What is the symbol for varistor?

What is the symbol for varistor? Varistor symbol The varistor circuit symbol can be seen to be very similar to that of a thermistor. It consists of the basic resistor symbol of a rectangle with

## What is the symbol for varistor?

Varistor symbol The varistor circuit symbol can be seen to be very similar to that of a thermistor. It consists of the basic resistor symbol of a rectangle with a diagonal line through it that has a small added section parallel to the body of the resistor symbol. This indicates the no-linear nature of the varistor.

### How do you read a varistor?

Touch one meter probe to the free varistor lead and the other probe to the connected lead. Read the resistance on the meter. If it reads nearly infinite resistance, the varistor is still good. If it reads very low resistance, the varistor is blown.

#### What is an MOV in a circuit?

An MOV is a voltage dependent device which has an electrical behavior similar to back to back zener diodes. ▪ When exposed to high voltage transients, the MOV’s resistance. changes from a near open circuit to a very low value, thus clamping the transient voltage to a safe level.

How does a multimeter detect metal oxide varistor?

Work the lead loose with a long-nose pliers. Turn the multimeter on and set its function knob to read resistance. Touch the meter probe tips to the MOV’s leads and measure its resistance. If it has a resistance much under 100 ohms, it has blown.

What happens when a varistor fails?

Under different current conditions, failure modes include electrical puncture (see Figure 4), physical cracking (see Figure 5), and thermal runaway. Cracking happens because varistors are basically a ceramic material, and hitting them with a sharp high-amplitude surge is like hitting a dinner plate with a hammer.

## How do you check if a varistor is working?

### What is the function of varistor?

Varistors are used as control or compensation elements in circuits either to provide optimal operating conditions or to protect against excessive transient voltages. When used as protection devices, they shunt the current created by the excessive voltage away from sensitive components when triggered.

#### Do varistors have polarity?

Does a varistor have polarity? In the case of metal oxide varistor, a zinc-oxide layer is basically sandwiched between two metal electrodes. As a result, there is no polarity.

What is the purpose of a varistor?

Varistors are used to protect a circuit from high voltage surges. When a high voltage surge is applied to a circuit, the outcome is usually catastrophic to the circuit. A capacitor may be installed across the signal lines.