What is Lagergren equation? In his derivation of pseudo first order equation for liquid–solid sorption systems, Lagergren started from a differential equation of the form dx/dt = k(X − x) (Ho, 2004). Here X refers

## What is Lagergren equation?

In his derivation of pseudo first order equation for liquid–solid sorption systems, Lagergren started from a differential equation of the form dx/dt = k(X − x) (Ho, 2004). Here X refers to the sorption capacity at equilibrium, whereas x stands for the sorption capacity at any time.

## What is pseudo-second order reaction?

pseudo-second order reaction means the reactions in which one parameter is thought to be constant among the three parameter dependent reactions.

**How do you calculate adsorption in kinetics?**

ce/qe = 1/qm KL + ce/qm , where ce is the equilibrium concentration of the adsorbate and qe is the adsorption capacity adsorbed at equilibrium, qm is maximum adsorption capacity and KL is the Langmuir adsorption constant.

### What is pseudo-second order?

The pseudo–second-order kinetic model is based on the assumption that the rate-limiting step is chemical sorption or chemisorption and predicts the behavior over the whole range of adsorption. In this condition, the adsorption rate is dependent on adsorption capacity not on concentration of adsorbate [49,50].

### What is a pseudo rate?

A term sometimes used for a. rate coefficient. . For example, if the rate equation is: v=k [A] [B] the function k [A] is the pseudo first-order. rate constant.

**What is Physisorption give an example?**

An example of physisorption is the adsorption of gases like hydrogen, nitrogen etc at lower temperature on the surface of adsorbent like charcoal. Physisorption depends on the surface area of the adsorbent. For example, finely divided metals and porous substances have a large surface area.

#### How is maximum adsorption capacity calculated?

adsorption capacity ( mg/gm) = [( Co – Ce) /m] x V, Co – Initial conc in ppm, Ce – Conc at equilibrium, m – mass of the adsorbent , V is the volume of solution containing solute ( adsorb ate) . i hope ,the equation used for the calculation is correct.

#### What is the difference between pseudo first and second order?

In addition to what has been said, all it means is that, for Pseudo first order, only one reactant is a determining step in the rate of a reaction. In second order, both reactants participate in a reaction.

**What is pseudo order reaction?**

Those reactions which are not of 1st order but approximated or appears to be of 1st order due to higher concentration of the reactant/s than other reactant are known as pseudo first order reactions.

## What is the unit for second-order reaction?

Unit of reaction rate (r) is moles per liter per second (mol. L-1. s-1) and the unit of second order rate constant is M-1. s-1 (M is molarity which can be expressed as mol/L).

## Which is the example for second-order level?

It happens when we look for something that only solves the immediate problem without considering the consequences. For example, you can think of this as I’m hungry so let’s eat a chocolate bar. Second-order thinking is more deliberate.

https://www.youtube.com/watch?v=gonP5o9R3XY