How do I set up Fox shock? Turn the 3-position lever to the OPEN mode. Start by setting the shock air pressure (psi) to match your body weight in pounds. With the air pump attached
How do I set up Fox shock?
Turn the 3-position lever to the OPEN mode. Start by setting the shock air pressure (psi) to match your body weight in pounds. With the air pump attached to the shock valve, slowly cycle your shock through 25% of its travel 10 times as you reach your desired pressure.
How much air should I put in my FOX shock?
Add air pressure to the main air chamber in ~50 psi (3.4 bar) increments, slowly cycling the shock after every 50 psi (3.4 bar) addition.
How do you set rebounds on Fox shocks?
Use your air pressure to find your rebound setting. Turn your rebound knob to the closed position (full clockwise) until it stops. Then back it out (counter-clockwise) to the number of clicks shown in the table below. Rebound controls the rate of speed at which the shock extends after compressing.
Why is Fox suspension so expensive?
they are expensive because they are great. stiff, durable, and in practice can go years without servicing.
What PSI is FOX 34?
200 psi
34 TALAS maximum air pressure is 200 psi. The recommended settings in this tuning guide are designed to be a starting point, in order to get you out on your first ride in as few steps as possible.
Is Fox suspension the best?
A Fox lift kit is absolutely worth it if you want to take your truck off-road, but you don’t think your suspension can handle it. When it comes to driving quality and cost-effectiveness, Fox lift kits are very hard to beat. You will not get better value for money from any other brand.
What should I do about my mountain bike shocks?
Omnico LTD. SPORTSON55 INC. Learn how to quickly set sag, air spring pressure, compression adjustments, rebound adjust, additional tuning options and more. To best maintain the performance and durability of your product under normal use, FOX recommends that you have regular fork and shock maintenance performed according to the service intervals.
What kind of suspension does a fox mountain bike use?
With a new 8mm damper shaft and an average weight savings of 35grams, the updated FIT4 damper provides more sensitivity while maintaining support during aggressive riding. Modifications to tuning and design providing a more usable range of adjustment. “FOX has come out with something very interesting globally, FOX Factory Tune.
How to set sag on a Fox Fork?
The video below guides you through the basics of setting sag and adjusting rebound on most FOX forks and shocks. For additional info, find your owners manual at www.ridefox.com/ownersmanuals»
What do you need to know about mountain bike suspension?
See axle-to-crown, rake, and more. Everything you need to know about general safety and installation of your fork. To best maintain the performance and durability of your product under normal use, FOX recommends that you have regular fork and shock maintenance performed according to the service intervals.