How do you use a trailer brake controller on a Ram 1500? Push the RIGHT arrow on the steering wheel to enter “TRAILER TOW”. Push the UP or DOWN buttons until the Trailer Brake Type
How do you use a trailer brake controller on a Ram 1500?
Push the RIGHT arrow on the steering wheel to enter “TRAILER TOW”. Push the UP or DOWN buttons until the Trailer Brake Type appears on the screen. Push the RIGHT arrow and then push the UP or DOWN buttons until the proper Trailer Brake Type appears on the screen.
What is the gain on a trailer brake?
The gain on your trailer brake controller must be set every time your trailer’s weight changes. The gain is what adjusts the amount of braking force that the electric brakes provide. Adjusting the gain on the brakes can be done quickly under the right road conditions.
Where does a brake controller plug into?
Step 5: Plug in the brake controller Using a vehicle-specific wiring harness, plug the brake controller into the vehicle. One end of the wiring harness plugs into the vehicle’s factory harness under the dash, and the other end plugs into the brake controller.
Where is the trailer brake controller Dodge?
Locate the OEM brake controller connector. It is usually located under the steering wheel to the right of the steering wheel.
Where can I get a trailer brake controller for a Dodge Ram?
Order the wire harness to go with your trailer brake controller. If you are installing an aftermarket controller (Tekonsha, Curt, etc.), make sure to buy the wire harness specifically designed by that manufacturer for the 4th generation Dodge Ram. The 2009 and later Ram 1500s have trailer brake controller connections stashed up underneath the dash.
How do you install brake lights on a Dodge Ram?
Use electrical tape or zip ties to secure the red brake light wire, and tug it away where it cannot be accidentally pulled free or damaged. Now that the under dash wiring is complete, plug in the wire harness module into the back of the brake controller. Then insert the controller into mounting bracket, and test the system.
What kind of mounting bracket do I need for Dodge Ram?
Mounting bracket installed. Dodge Ram 1500s from 2009 and on have an integrated plug-in wire harness that eliminates the need for splicing wires. Order the wire harness to go with your trailer brake controller.
Where is the brake controller on a Mopar truck?
Bolt-On Installation. Setting up this electronic trailer brake controller offers a bolt-on process. Using a few basic hand tools, you can mount it onto your truck’s dashboard, near the left side of your steering wheel. To ensure proper installation, a moderate-to-advanced level of mechanical expertise is required.