How big is a pump jack? Pumpjacks range in size, from small enough to fit in the back of a pickup truck, to 40 feet in height with counter weights up to 20,000 pounds. So
How big is a pump jack?
Pumpjacks range in size, from small enough to fit in the back of a pickup truck, to 40 feet in height with counter weights up to 20,000 pounds. So now you know.
How much does a pump jack weigh?
Specifications
| Feature | Size / Details |
|---|---|
| Component | Pump Jack |
| Certifications | ANSI A10.8 (2001), OSHA |
| Approx. Shipping Weight (lb) | 24 |
| Approx. Cu. Ft. Per Unit | 1.83 |
What is pump jack?
Pump jacks are a uniquely designed scaffold consisting of a platform supported by moveable brackets on vertical poles. The brackets are designed to be raised and lowered in a manner similar to an automobile jack.
When was the pump jack invented?
In the 1870s-80s, the metal device named pump jack, first conceived by Plackross in 1877, replaced the wooden structure that served the early industry so well, and it then spread over the south and west of the United States.
Where does the pump jack get its power from?
Modern pumpjacks are powered by an engine known as a prime mover. Some are powered by electricity, while others in more remote locations run off natural gas. The prime mover runs a set of pulleys to the transmission, which in turn drives a pair of cranks.
How does a nodding donkey work?
The nodding donkey has a steel hammerhead hovering over the well, bobbing up and down to create suction in the hole, aided by a rotating counterweight. The method is effective on vertical wells that go straight down, but is less so when used on horizontal ones.
Why is it called a pump jack?
Others are simply a straightforward description of what it actually does – jack pump and sucker rod pump a case in point. But perhaps the biggest inspiration for the naming of the pumpjack comes from the way it moves – ‘rocking’, ‘nodding’, and ‘thirsty bird’.
What is another name for a pump jack?
– A pumpjack (also called donkey pumper, nodding donkey, pumping unit, horsehead pump, rocking horse, beam pump, dinosaur, sucker rod pump, grasshopper pump, Big Texan, thirsty bird, or jack pump) is the overground drive for a reciprocating piston pump in an oil well.
How long does a pump jack last?
Pumpjacks on vertical wells can last five or six years without any problems, said Jesse Filipi, who until last year worked as an engineer for Marathon Oil Corp.
How much oil do we have left?
There are 1.65 trillion barrels of proven oil reserves in the world as of 2016. The world has proven reserves equivalent to 46.6 times its annual consumption levels. This means it has about 47 years of oil left (at current consumption levels and excluding unproven reserves).
What type of mechanism is a pump jack?
A pumpjack converts the rotary mechanism of the motor to a vertical reciprocating motion to drive the pump shaft, and is exhibited in the characteristic nodding motion. The engineering term for this type of mechanism is a walking beam.
What is a oil donkey?
A pumpjack (also known as nodding donkey) is the popular name for the aboveground part of a pump that pumping oil from the ground. Depending on the size of the pump, it generally produces 5 to 40 litres of liquid at each stroke.
How big does a pumpjack pump unit need to be?
PUMPJACK.com LS PUMPJACK’s pumping units are superbly engineered, quality constructed products. Our complete line of unit models is manufactured to API standards in sizes ranging from 40 to 1280, enabling operators to satisfy the most challenging of lifting requirements. PUMPJACK Ours.
How much oil does a pumpjack pump produce?
Pumpjacks are common in oil-rich areas. Depending on the size of the pump, it generally produces 5 to 40 litres (1 to 9 imp gal; 1.5 to 10.5 US gal) of liquid at each stroke. Often this is an emulsion of crude oil and water.
How does a pumpjack work in a well?
The corresponding upstroke raises the horse head and rod. The rod itself is connected to a subsurface pump which lifts oil to the surface well head. A pumpjack’s operation depends largely upon its design specifications, including the pump angle, weight of the counterweights, fluid weight and density, and stroke length.
When was the Jensen 13W pump jack made?
The Jensen 13W Pump Jack has become a novelty with many companies in the oil and gas industry. Originally built for water well service, many producers and collectors are using these as art pieces in their office lobbies and public arenas. These units were built from the mid 1950’s to the early 1970″s.