How do I program my Radio Shack remote to my TV?

How do I program my Radio Shack remote to my TV?

How Do You Program a Radio Shack Universal Remote?

1. Power on the television or the other device you want to use.
2. Press down the button you want to program (such as TV, cable or VCR).
3. Push and hold the “Setup” button until the LED light on the front of the remote flashes twice.
4. Push “9,” “9” and “1.”

How do I find my TV device code?

How to Find The TV Device Code For Your Cable Remote

1. Go to the “Universal Electronics Cable Remote Support” page online.
2. Select the remote control model number you own; you can identify it by the look and design of the remote.
3. Type in the brand and type of TV you own and submit to receive your device code.

Where is the Setup button on a Radio Shack universal remote?

Press the “Setup” button located on the remote control and hold the button until the red indicator light illuminates. Press the button under the device category you wish to program such as “TV,” “VCR,” or “CBL”.

How do I program my universal DVD remote?

How to program a universal remote to a DVD player, Blu Ray player, or TV:

1. Turn on the device.
2. On the remote control, press the corresponding device button – “TV”, “DVD” or “AUX.”
3. Press and hold the “RCU SETUP” button until the device key blinks twice.
4. Press “9” “9” “0” using the number pad on the remote.

How do I program my Radio Shack 4 in one remote?

the remote control’s entire library.

1. Manually turn on the device you want to. set up.
2. Press the corresponding device key ( TV. , VCR.
3. Hold down. P. until the red light blinks twice, then press.
4. Aim the remote control at the device you. want to operate.
5. Repeatedly press. POWER. then the device.
6. When the device turns off, press.

How do I program my Radio Shack remote to my Vizio TV?

Enter one of the programming code from the list 0517 0505 0534 0525 for your RADIO SHACK Cable device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off.

How do I program my TV with a universal remote?

Here is an example of likely steps:

1. Turn on your TV or another device you wish to control.
2. Press and release the DEVICE button on your remote that is associated with the product you want to control (TV, etc.).
3. Press the Device Button again, as well as the POWER button at the same time.
4. Release both buttons.

How do I find the pairing code for my Vizio TV?

If you’re pairing to a TV, you’ll see a 4 digit code displayed at the top of your screen. Simply type in that 4 digit code. *If you’re connecting to a sound bar, you’ll be asked to press a button on the sound bar itself to confirm the connection.