What did Chevy 882 heads come on? In 1975 , a lighter cast head was released sporting 1.94I and 1.50E valves: the casting number was 333882. the 882 heads were installed on the 350 ci.
What did Chevy 882 heads come on?
In 1975 , a lighter cast head was released sporting 1.94I and 1.50E valves: the casting number was 333882. the 882 heads were installed on the 350 ci. and 400 ci engines(400 heads had steam holes).
Can I put 305 heads on a 350?
The combination worked out ok. It ran well and made good power. The 305 heads I used had a smaller combustion chamber than the 350 heads that were on the motor originally so it bumped the compression a little. The downside was the heads also had smaller valves so that was a bit of a disadvantage.
How do I know what Chevy heads I have?
Chevy heads have often been identified by sight and most commonly by the different casting shapes on the ends of the cylinder heads. While these casting marks cannot tell specifics about the cylinder heads, they can help identify a performance head from a non-performance head.
How do you identify World Product heads?
On World heads, casting marks and numbers are found below the valve cover bolts, in-between the valve rocker studs. All World heads have a World casting mark. Located on the left side of the cylinder head top, with the exhaust ports facing you, there is a “W,” indicating World.
Are 041 heads good?
They are not the best flowing (not bad though), but can be pocket ported at home very easily. These heads are a replacement for the 186 castings. I think the only real difference is that the casting are a bit thicker (which is better).
What are bowtie heads?
Vortec Bowtie cylinder heads are the most powerful cast-iron heads offered by Chevrolet Performance. The heads provide outstanding low-lift flow numbers (the more air you flow, the more potential power) and Fast Burn performance all in an affordable, cast-iron head.
Are Vortec heads aluminum?
Chevy Vortec Aluminum 350 Cylinder Heads 64cc 2.02/1.60 NEW HI-FLOW Aluminum 64cc Cylinder Heads. 190CC intake ports. Vortec design combustion chamber.
How much horsepower does double hump heads add?
Stock “double hump” heads flow 202 cfm intake and 141 cfm on the exhaust. If you must maintain a stock looking port, consider our “Undercover Porting”. With our “Undercover Ported” they will flow 220-230 cfm intake and 165 cfm exhaust. This flow improvement will add 15 to 25 horsepower to your engine.
What is a head casting?
The shape and position of the intake and exhaust ducts as well as the shape of the combustion chamber in particular determine the overall geometry of the cylinder head. …
Is the Krups gusto 880 a good espresso machine?
I’ve owned two of these simple, compact, and rather pricey Krups Gusto 880 espresso makers. While the design, espresso quality, and simple use are plus points, both machines suffered from identical component failures: the rocker on-off switch. I personally replaced one switch on the first I owned for many years.
Which is the best head for an 882?
There are two different types of 882’s – heavy and lightweight. The lightweight are crack prone, the heavy are not. If you want to only make 300hp, these heads will do it with some flat top pistons. The best factory heads are Vortec’s that came on the last 350’s, but they take a specific intake and centerbolt valve covers.
How many shots of espresso in a Krups coffee maker?
Latte lovers will enjoy making their own with this compact, lightweight espresso maker from respected manufacturer Krups. It brews up to four shots of espresso at a time and has a safety switch that allows instant switching from brewing espresso to frothing milk.
What kind of kitchen appliances do Krups make?
GOOD IS IN THE DETAILS DISCOVER THE KRUPS CULTURE PRODUCTS SMALL KITCHEN APPLIANCES Discover the product category ELECTRIC KETTLES TOASTERS TOASTER OVENS HAND MIXERS FRYERS WAFFLE MAKERS INDOOR GRILLS WHERE TO BUY COFFEE APPLIANCES Discover the product category Filter Coffee Makers SUPER AUTOMATICS COFFEE GRINDERS ACCESSORIES STORE ALL ACCESSORIES