What is the frequency of Baofeng Bf-888S? 400-520 MHz From the manufacturer BF-888S BF-88ST Frequency Range UHF: 400-520 MHz FRS: License-free Flashlight ✓ ✓ New Integrated Antenna ✓ USB Desktop Charger ✓ Can Baofeng talk
What is the frequency of Baofeng Bf-888S?
400-520 MHz
From the manufacturer
| BF-888S | BF-88ST | |
|---|---|---|
| Frequency Range | UHF: 400-520 MHz | FRS: License-free |
| Flashlight | ✓ | ✓ |
| New Integrated Antenna | ✓ | |
| USB Desktop Charger | ✓ |
Can Baofeng talk to GMRS?
The Baofeng is capable of transmitting on FRS/GMRS & MURS.
What frequency do Baofeng radios use?
The BaoFeng UV-5R is a compact hand held transceiver providing 4 watts in the frequency range of 136-174 MHz and 400-480MHz (520MHz later versions). It is a compact, economical HT that includes a special VHF receive band from 65 – 108 MHz which includes the regular FM broadcast band.
Is the Baofeng BF 888S legal?
You may use the Baofeng, but only with appropriate license, which may require you to go through an application process. You may use the Baofeng, but only on Amateur allocations, with an amateur license, which you do not state in your post that you have one.
Can Baofeng pick up police?
If the Baofeng is… anything, it’s a HAM radio, not a police scanner. Most scanners can be HAM radios, but most of the time, it’s not the other way around.
Can you use chirp on Baofeng bf-888s?
After using Baofeng’s software to adjust some of these settings (like language, which was set to Chinese on these radios)and uploading them back to the radio, CHIRP magically was able to see the setting and populated the menu as normal. However, CHIRP will not upload any changes to the settings to these radios.
Is there a VHF channel on Baofeng bf888s?
Fortunately yes it seems that the radio chip on Baofeng BF888s are capable of accepting VHF frequency channels although I have not open the radio to check the datasheet on what chip was actually used on this tiny radio with a good form factor.
When did I buy a new bf-888s radio?
Purchased 2 new BF-888s radios in August 2019. CHIRP (daily-20190817) downloads from radio and shows/writes changes to frequencies in memory menu without issues. However, settings menu is completely blank.
Is the Settings menu blank on Baofeng bf-888s?
However, settings menu is completely blank. Attempted to write an image to the new radio from an older model BF-888s that CHIRP works correctly with, but radio settings were unchanged (i.e. still blank). Found a version of Baofeng’s programming software online “2013-3-7 BF-480_888_BFE90_V6_490_568_U3_K5_U8_BF-R5.zip”.