How do I reset my Honda service A1? This method should work on any Honda trim model that has a touch screen with a home screen. Press home. Select settings. Press vehicle settings. Scroll down
How do I reset my Honda service A1?
This method should work on any Honda trim model that has a touch screen with a home screen.
- Press home.
- Select settings.
- Press vehicle settings.
- Scroll down to maintenance info and press it to select it.
- Press reset.
- A screen will pop up asking if you really want to reset it or cancel. press reset and that should do it.
What is Honda Maintenance Code A1?
The “A” stands for the oil and filter change and the “1” stands for tire rotation. The A1 service code means to replace the engine oil and rotate tires, check tire pressure, and inspect tire condition.
How do I reset my Honda service?
Resetting Your Honda Oil Maintenance Light in 4 Steps
- Turn the ignition to run (one click before starting the engine).
- Press the Select/Reset button located on either your steering wheel or as a knob on your dash.
- Press and hold the Select/Reset button for 10 seconds.
What does the wrench light mean Honda?
Maintenance Minder™ Indicator Light: A yellow wrench on your dashboard means your Honda Accord is due for routine maintenance. It means ECON mode has been activated and is helping your Accord deliver an efficient performance.
What does A1 oil life mean?
The code “A1,” for instance, means you need to replace your vehicle’s oil and to rotate your tires, ensure appropriate tire pressure, or have your tires replaced. At 15% oil life, the Maintenance Minder light will turn on.
How accurate is Honda Maintenance Minder?
The MM is based 100% on mileage for all maintenance except for oil changes. Oil life take certain driving conditions into consideration. The service codes don’t come up on their own. They coincide with the oil change interval closest to the mileage they are do.
How do you reset percentage after oil change?
Step 1: Turn your Civic ignition on without starting your engine or press the start button twice without touching the brake. Step 2: Press the Trip knob repeatedly until the Engine Oil Life percentage displays. Step 3: Press and hold the trip knob until the Engine Oil Life percentage starts to blink.