What is a VW comfort control module?

Charlotte SmithMiscellaneous

What is a VW comfort control module? The CCM is the body computer. It controls the power windows, power sunroof, power locks, wireless remote functions, alarm, interior lights. On the GLX models it also takes

What is a VW comfort control module?

The CCM is the body computer. It controls the power windows, power sunroof, power locks, wireless remote functions, alarm, interior lights. On the GLX models it also takes care of the power seat memory and power mirror memory. This module is located under the carper just in front of the drivers seat.

What does the CCM control?

The Comfort Control Module (or Convenience Control Module) is responsible for handling the electronic functions of the vehicle. All the electronics are controlled by the Comfort Control Module (CCM). It’s a black box underneath the floor panel (RHD).

How do I reset my CCM?

Press and hold the Menu button for 3 seconds (the menu button is the center button on the circular control pad). Using the navigation arrows, navigate to Front panel menu>Administration>Reset CCM pass>Reset CCM pass.

How do you relearn a body control module?

IF YOU DO NOT HAVE ACCESS TO THE TECH TERMINAL, A 30 MINUTE RELEARN PROCEDURE MUST BE PERFORMED BY FOLLOWING THESE STEPS:

  1. PLACE A JUMP PACK ON THE VEHICLE.
  2. TRY AND START THE VEHICLE.
  3. RETURN THE KEY TO THE RUN POSITION.
  4. WAIT 10 MINUTES.
  5. TURN THE KEY FROM RUN TO OFF.
  6. RETURN THE KEY BACK TO THE RUN POSITION.

What happens when a BCM goes bad?

Symptoms of a Misfiring BCM Electronics, like windshield wipers and keyless entry, stop working properly. Flashing dashboard lights, or improper dashboard lighting. I.e., you could have a check engine light that should be on but isn’t, or you can have a check engine light that is on but shouldn’t be.

Can you reprogram a used BCM?

Hi Andrew. Unfortunately, any control module needs to be flashed or reprogrammed to link to the sensors and monitors of an individual vehicle in order for them to work correctly. This needs to be completed by a dealer or some automotive specialists, as they control security codes to reprogram these systems.

https://www.youtube.com/watch?v=vDhaR3zOC-I