Do you need a tune with a wet shot of nitrous? You don’t “need” a tune for a small wet shot. They are jetted to run fairly rich (usually). It’s definately a great idea though.
Do you need a tune with a wet shot of nitrous?
You don’t “need” a tune for a small wet shot. They are jetted to run fairly rich (usually). It’s definately a great idea though. At least dyno it with wideband to see how its running.
Which nitrous kit is better wet or dry?
Dry nitrous kits are a great first step and require less work for installation and a small bump in power output. A wet nitrous kit will deliver a fuel/nitrous oxide mixture into your intake tract.
How does a wet nitrous kit work?
A “Wet System” adds additional fuel with a separate pump through the same plate or nozzle, supplying the nitrous oxide. The complete system is activated by a switch, either controlled by the driver or set up on the throttle linkage, the switch activates a set of solenoids for both the nitrous and the fuel.
Can you run nitrous without tune?
Yes nitrous (by itself) will lean out a AFR, but make it a wet shot, and you “should” be good. some tweaking might need to be done to the jets, but thats it.
How much horsepower does a 75 shot of nitrous add?
To answer your original question, a 75 wet shot from zex will be roughly 65-70 hp to the rear wheels and around 80-90 tq.
What happens if you don’t purge nitrous?
You’ll go rich with a wet shot if you don’t purge, a dry shot you’ll just have a small delay before the nitrous hits the nozzle.
How much horsepower does a 150 shot of nitrous add?
With a 150 shot u should be getting 90 whp so thats still good.
How do you hook up nitrous to a carburetor?
How to Install Nitrous Oxide
- Step 1: Mount the Bottle and Brackets. Find a safe location to mount the nitrous bottle.
- Step 2: Install Nitrous Line.
- Step 3: Remove the Carburetor.
- Step 4: Set Up the Nitrous Plate.
- Step 5: Adding Fuel.
- Step 6: Install the Nitrous Plate and Carb.
- Step 7: Wiring.
- Step 8: Install Pressure Gauge.
Do you need a nitrous controller?
You can actually accomplish the basics without a nitrous controller if you use an RPM window switch and have dummy switches for wide open throttle and fuel pressure wired in series. It is important to measure fuel pressure because you’ll go super lean if you keep spraying nitrous oxide when fuel flow decreases.
How does a wet nitrous fuel system work?
A “Wet System” adds additional fuel with a separate pump through the same plate or nozzle, supplying the nitrous oxide. The complete system is activated by a switch, either controlled by the driver or set up on the throttle linkage, the switch activates a set of solenoids for both the nitrous and the fuel.
What do you need for a nitrous oxide kit?
All Nitrous Kits will ship with the complete Full screen DVD that includes FPSS, Heater Kit, Remote oepner, Blow down, performance tuning tips, solenoid maintenance and more! Note: Video might take a few minutes to download depending on the speed of your internet connection.
Where can I find wiring diagrams for nitrous oxide?
You will also find wiring diagrams. coming soon, we will have awesome step by step color photo install instructions outlining almost every single step from taking your kit out of the box to putting on the finishing touches with easy to understand pictures. Our goal is to making installing your nitrous oxide kit easy and fun!!
How to install a nitrous oxide bottle heater?
Learn how to install your Nitrous kit, Bottle Heater, Purge kit etc. You will also find wiring diagrams. coming soon, we will have awesome step by step color photo install instructions outlining almost every single step from taking your kit out of the box to putting on the finishing touches with easy to understand pictures.