What does 5Y EF mean on a Frigidaire refrigerator? The 5Y EF error code indicates an issue with or between the fan motor and the control board. I suggest check the wiring between evaporator fan
What does 5Y EF mean on a Frigidaire refrigerator?
The 5Y EF error code indicates an issue with or between the fan motor and the control board. I suggest check the wiring between evaporator fan and control board. Make sure everything is plugged in securely. You can also resent the appliance but cutting power off to the appliance for 5 mins to see if the code clears.
Why does fridge say Sy CF?
When your Frigidaire refrigerator displays the SY CE error code, this means there is a communications issue. This communication problem is caused by either a wiring issue, wire harness issue, faulty control board, or a bad user interface board.
How do you run a diagnostic on a Frigidaire refrigerator?
How to Enter the Diagnostic Mode on a Frigidaire Refrigerator
- Press and hold the “Freezer Temperature UP” and the “Freezer Temperature DOWN” buttons at the same time.
- Release and press the buttons together twice more within five seconds to enter the diagnostic mode to test the Frigidaire.
Why is my Frigidaire refrigerator not getting cold?
A Frigidaire refrigerator not cooling properly may have a dirty or damaged seal, allowing cold air to escape and warm air to enter. Assess the door seal for dirt and debris or signs of damage like rips or tears.
Frigidaire refrigerator: SY EF or (5y ef) This code signals lack of air above the air sensor, meaning there is a sensor problem, or the evaporator fan is not working properly. Most likely, there was a circuit breakdown in the evaporator fan section. Check the wiring and connections between the fan and control board.
What does an error code on a Frigidaire refrigerator mean?
If no problem is found, the evaporator fan may need to be repaired or replaced. It this does not work, check the control board and, if necessary, repair or replace it. This error code reports a communication problem when a refrigerator is switched on. Check the wiring and connections between the user interface and control board.
What does the error code Sy / EF mean?
ANSWER Hello Dennis, This is actually error code SY/EF. It indicates an issue in the evaporator fan circuit. You will need to verify voltage to the fan motor and if voltage is present, replace the evaporator fan motor 241509402. If no voltage is present, replace the control board 242115240 if no wiring issues exist.
What does ” hi ” mean on a Frigidaire refrigerator?
Typically, error code “HI” (the customer may say “H1”) on a Frigidaire refrigerator unit indicates that the unit has detected high temperature in the freezer and/or the refrigerator. Try setting the freezer temperature to 0 degrees (or a lower setting) and the refrigerator to 37 degrees.