What height rings do I need?

What height rings do I need? To select the correct height ring calculate the height of half of the riflescope’s widest point (normally the objective bell of the scope), you will then need to know

What height rings do I need?

To select the correct height ring calculate the height of half of the riflescope’s widest point (normally the objective bell of the scope), you will then need to know the height from the bottom of the ring mount to the middle of the ring mount, select the ring mount height that is just over half of your riflescopes …

How tall are high scope rings?

Top Mount Ring Height Guide

Ring Size Saddle Height Fits Objective
1″ Low 0.089 Thru 38mm
1″ Medium 0.169 Thru 40mm
1″ High 0.332 Thru 44mm
1″ X-High 0.560 Thru 50mm

What height rings for 34mm scope?

Ring Height

Outside Objective Diameter Ring Height for 1 Inch Tubes
31mm, 1.122 inches .150 inches
32mm, 1.259 inches .150 inches
33mm, 1.299 inches .150 inches
34mm, 1.338 inches .150 inches

Are Warne Scope Mounts good?

The Warne Scope Mounts QD rings are awesome. They’re solidly built, easy to install and return within a 1/4 MOA for my Ruger GSR. I’d originally used their low QD rings but the Nikon scope I’d paired it with had an eyepiece that was a bit too large and didn’t give enough clearance for the eyepiece cover.

What height rings for Vortex Crossfire 2?

1-inch
Rings and Bases Your new Vortex Crossfire riflescope will require 1-inch rings. Use the lowest ring height that will provide complete clearance of scope and rifle—avoiding any contact with barrel, receiver, bolt handle or any other part of the rifle.

What height rings for Strike Eagle?

I have a ruger precision rifle in 6.5 creedmore and a vortex strike eagle 5-25×54, what height for the rings should i pick?? Answer: These Vortex Precision Matched Rings position the center of the riflescope tube at a height of 1.45 inches (36.8 mm) from the base.