How do you clean a Harley Davidson oil cooler? Do not use something forceful like a pressure washer or compressed air to clean the M8 Harley oil cooler. The excessive pressure can bend or warp
How do you clean a Harley Davidson oil cooler?
Do not use something forceful like a pressure washer or compressed air to clean the M8 Harley oil cooler. The excessive pressure can bend or warp the cooler’s fins. The best way to clean the oil cooler body is with soap & water and a soft nylon brush.
How do I choose an oil cooler?
Each factor plays a role in deciding which cooler best fits your requirements. A basic rule of thumb is to add as big of an oil cooler as can fit in the available space that receives good airflow, and then add a thermostat so that the oil can be kept in the proper temperature range.
Does an oil cooler need a fan?
Ideally, an oil cooler should face directly into the oncoming air stream and, just as important, should provide a proper exhaust path from the rear of the heat exchanger. If you need a cooling fan, it’s better to pull air than push it.
How does Harley oil cooler work?
How does it work? An oil cooler is essentially a small radiator that contains several thin pipes or coils. Oil enters one end of the radiator, passes through these thin pipes, and exits the radiator from the other end, causing heat to dissipate in the process.
What is the normal oil temperature on a Harley?
Cylinder head temperatures run in the 350 – 400 degree range, sometimes higher. Your oil is sitting in the head for a short time before it returns to the oil tank. It’s safe to say it gets much hotter than 250 degrees for part of its trip through the engine.
Where is the oil cooler?
Oil coolers are located in front of an engine’s cooling system in an automobile. It only works when the engine is running and it cools the oil as it passes through the coil.
What does a motorcycle oil cooler do?
The purpose of the cooler is to circulate engine oil before it flows into the rest of the bike to lubricate various moving parts. Without any type of cooler, the oil used in your bike will likely overheat from the amount of friction the engine produces while operating.
Do oil coolers increase HP?
What’s really nifty is that any heat relieved by an oil cooler is relatable to some amount of horsepower that is not lost as waste heat in the engine. Beals said the rule of thumb is 1 horsepower equals 2,544 BTU per hour. It’s also a good idea to flow oil through the filter before routing it through the cooler.