Can epoxy be used as clear coat?

Can epoxy be used as clear coat?

Clear coats are designed for application over 2-Part resinous coatings and some single part moisture cured resinous coatings. Do not confuse garage floor paint or 1-Part epoxy paint as a floor coating. Technically, you could rough up the finish of dried floor paint and apply a water based epoxy as a clear coat.

Can you coat concrete with epoxy?

Many people wonder if garage floor epoxy can be applied to concrete floors. The answer is yes, in fact, epoxy was specifically made for concrete floors, whether garage floors, industrial plants or showrooms.

What is the difference between 1 part epoxy and 2 part epoxy?

Single component epoxy floor paints are typically a latex acrylic floor paint with a small addition of epoxy, which air dries like a traditional paint. A two part epoxy floor coating is a two componentkit which cures by an exothermic reaction when both parts are mixed together.

Is concrete coating better than epoxy?

Benefits of Polyurea Concrete Coatings As mentioned above, Polyurea is 4x stronger than Epoxy. It is also 98% more flexible than Epoxy. It is the flexibility of the material that makes it extremely durable and long-lasting. Since the material is flexible, it will not crack or peel.

How long after epoxy can you clear coat?

Allow a minimum of 24 hours dry time after coating with EpoxyShield Floor Coating before applying clear. Apply within 5 days to avoid sanding. Ensure the surface is clean and dry before applying.

Can you put a second coat of epoxy on garage floor?

Only one coat of EpoxyShield is needed on most concrete floors. If a second coat is needed / desired, it can be applied once the initial coat has dried. For the best adhesion, apply the second coat within 4 days of the first coat.

What finish can I put over epoxy?

Both oil-based and water-based polyurethane can be applied over epoxy, although oil-based polyurethane may leave an amber hue (while water-based will be more clear). To ensure proper application, be sure that the epoxy has completely sealed/hardened, and sand first to allow for a mechanical bond.