How do I access my BigPond Router?

How do I access my BigPond Router? Enter the correct URL for your modem: For nbn™/ADSL/Velocity/Cable (with Adapter) modems – enter http://10.0.0.138 or http://telstra.gateway/ For Cable (without Adapter) modems – enter http://192.166.0.1 or http://telstra.gateway/ What

How do I access my BigPond Router?

Enter the correct URL for your modem: For nbn™/ADSL/Velocity/Cable (with Adapter) modems – enter http://10.0.0.138 or http://telstra.gateway/ For Cable (without Adapter) modems – enter http://192.166.0.1 or http://telstra.gateway/

What is my BigPond IP address?

For ADSL/Cable/nbn compatible Modems with an Adapter – enter http://10.0.0.138 or http://telstra.gateway/ For Cable Modem without Adapter – enter http://192.166.0.1 or http://telstra.gateway/

How do I connect my BigPond modem?

Set up steps – Cable internet

  1. Plug the Telstra Cable Adaptor into a cable port. First, you’ll need to find the right cable port in your house.
  2. Plug the Telstra Cable Adaptor into a power outlet.
  3. Connect the Telstra Cable Adaptor to your Telstra Smart Modem™
  4. Plug your Telstra Smart Modem™ into the power outlet.

What’s my modem’s IP address?

Type ipconfig (Windows) or ifconfig (for Mac and Linux) and press Enter. Look for the Default Gateway line to find the IP address represented by a string of numbers and periods. You might also find the IP address printed on the back or underside of the modem, along with the user name and password.

How do I log into my NBN router?

To do this:

  1. Log on to your Belong Wi-Fi (you don’t need to be connected to the internet to do this)
  2. Open an internet browser (e.g. Internet Explorer, Safari or Chrome)
  3. Type 10.0.0.138 into the address bar.
  4. If prompted, type in your modem username and password: Enter the username ‘admin’ Enter the password ‘Belong’

Is your IP address fixed?

A static IP address is simply an address that doesn’t change. Once your device is assigned a static IP address, that number typically stays the same until the device is decommissioned or your network architecture changes. Static IP addresses generally are used by servers or other important equipment.

How do I connect to my NBN router?

Connect the power cable to the Wi-Fi Router.

  1. Connect the power adapter to the power point.
  2. Connect the Ethernet cable into the ‘Internet’ or ‘WAN’ port.
  3. Plug the other end of the Ethernet cable into port UNI-D1 at the back of the nbn modem.
  4. Connecting via Wi-Fi.
  5. Search for available wireless networks on the computer.

How do I reconnect my WIFI?

Add the Wi-Fi network again

  1. Open your phone’s Settings app.
  2. Tap Network & internet. Wi-Fi.
  3. At the end of the list, tap Add network.
  4. If needed, enter the network name (SSID) and other security details.
  5. Tap Save. If needed, enter a password.

What does IP address mean on BigPond ADSL?

An IP address is a unique identifier for your computer, while it’s connected to the internet. The IP address for BigPond ADSL is dynamic by default. This means your computer is assigned a different IP address each time you connect to the BigPond network.

How to enable BigPond on a D-Link router?

Enable BigPond: Check this option to connect to the internet through Telstra BigPond Cable Broadband in Australia. Telstra BigPond provides the values for BigPond Server, BigPond User Id, and BigPond Password . Select this option if your ISP requires you to use a PPPoE (Point to Point Protocol over Ethernet) connection.

Is the IP address for BigPond static or static?

The IP address for BigPond ADSL is dynamic by default. This means your computer is assigned a different IP address each time you connect to the BigPond network. With BigPond’s Static IP for ADSL service, your computer is assigned the same IP address every time you connect to the BigPond network.

What do I need to set up Telstra BigPond?

Telstra BigPond provides the values for BigPond Server, BigPond User Id, and BigPond Password . Select this option if your ISP requires you to use a PPPoE (Point to Point Protocol over Ethernet) connection. DSL providers typically use this option.