What size board do I need to mount a mailbox?

What size board do I need to mount a mailbox?

6 1/2″x 19″
Untreated sturdy pine board, fits standard USPS residential mailbox (6 1/2″x 19″) and will bolt directly to any SwingClear mailbox post. Includes screws to mount mailbox. Can also be used with most other posts.

How do you mount mailbox to pole?

1. Step 1: Dig Hole For Post. USPS mandates that a pole-mounted mailbox be no taller than 45 inches above street level.
2. Step 2: Secure Mailbox Post. Using support beams or a helper, prop the post to make sure that it remains straight while concrete is poured.
3. Step 3: Attach Mailbox.
4. Step 4: Finishing Touches.

How do you attach a mailbox to metal post?

1. Step 1: Measure. Measure the length of the bottom of the mailbox and subtract half an inch.
2. Step 2: Cut With Your Saw.
3. Step 3: Center The Extension.
4. Step 4: Install The Screws.
5. Step 5: Line Up Your Mailbox.
6. Step 6: Mark The Mounting Holes.
7. Step 7: Drill The Holes.
8. Step 8: Install The Mailbox.

Can you mount a mailbox to a railing?

You can attach a mailbox to a porch railing using L brackets. Forget the mail slot in the front door or the post box at the end of the driveway. Attaching your mailbox to a porch railing is a practical as well as decorative choice.

How do you attach a flag to a mailbox?

Luckily, it is easy to replace just the flag.

1. Step 1 Flag.
2. Place the rubber o-ring onto the bracket.
3. Insert the bracket of the assembled flag through the holes on the outside of the mailbox.
4. Push the flag keeper through the bracket until the flag reaches the desired tightness.
5. You are finished!

What are mailbox regulations?

In general, single mailboxes are permitted to exist within the highway right-of-way provided they do not interfere with the travelling public or the function, maintenance, or operation of the roadway system. no multiple mailboxes or super boxes are permitted to exist within the highway right-of-way.

Do I need permission to move my mailbox?

Postal Service Rules The Postal Service permits moving a mailbox, but it must be placed in a location that is readily accessible by a mail carrier. For example, roadside mailboxes must in a location where mail carriers can place mail from their delivery vehicles.

How do you attach a mailbox to a wooden post?

Drive a 3-inch wood screw through the mitered board and into the mailbox post. Mount your two mailboxes by sitting them on top of the support frame, facing the road. Screw or nail each box to the horizontal 4-inch board faces, placing the fasteners in the box’s mounting holes.

How do you mount a mailbox post?

Place the mounting board on the mailbox post arm and drill the holes, making sure you drill into the post arm. Use 2-inch deck screws to mount your mounting board to the mailbox post arm. Use the cordless drill to save time in putting in the screws.

How do you attach a mailbox to a post?

Attach Mailbox. Most mailbox kits will come with a wood anchor to attach to the post. After screwing the anchor to the post, slide the mailbox over anchor and secure with screws.

What is mailbox bracket?

Mailbox Mounting Bracket is designed to fit mailboxes with mounting holes on either the side or underneath the mailbox. This mounting bracket is designed to support most light and heavy-weight mailboxes. Bracket easily mounts to mailbox with side or bottom mounting assembly.