What temperature should a 2008 Chevy Silverado run at?

What temperature should a 2008 Chevy Silverado run at?

195-210 is normal operating range for engine temp.

What transmission do I have in my 2008 Chevy Silverado?

4L60E is the transmission that is in there.

How do I know if my Silverado is LS or LT?

Much like with LS engines, the easiest way to be sure which LT engine you have is to check the 8th digit of the Vehicle Identification Number (VIN).

Where is the yaw sensor located on a 2008 Chevy Silverado?

The YAW rate sensor in the Chevy Silverado can be found under the passenger seat mounted on the floorboard of the truck so that it can access the center of gravity.

Is 230 too hot for an engine?

For most cars, the normal operating engine temperature is in a range of 195 to 220 degrees Fahrenheit, though most dashboard temperature gauges don’t show an exact temperature. Instead, there are typically markings for cold and hot on the edges of the gauge and a normal range in the middle.

How hot is too hot for an engine?

Normal operating temperature of new and used vehicles Of course, factors such as air conditioning, towing and idling at a stop will impact this, but you should be fine if your car is running at anywhere between 190-220 degrees. Over this limit, and your radiator and coolant fluids run a higher risk of burning.

What transmission does a 2008 GMC Sierra have?

four-speed automatic transmission
All Sierra engines are mated to a four-speed automatic transmission.

What transmission do I have in my Chevy Silverado?

Open the driver’s side door and find the white card on the side of the door that is filled with small black lettering. This card contains specific details about the year the car was made, its transmission, engine specifications and other details. Underneath or beside the “TR” symbol will be a number code.

How do I know if my yaw sensor is bad?

Symptoms of a Bad or Failing Yaw Rate Sensor

1. Check Engine Light comes on. When the yaw rate sensor works correctly, the fault that it detects is electronically sent to the device that needs to receive the input.
2. Vehicle Stability or Traction Control Lights illuminate.
3. Stability Control Light flashes intermittently.

How much does it cost to replace a yaw sensor?

Yaw Sensor Replacement Cost – RepairPal Estimate. Labor costs are estimated between $90 and $113 while parts are priced at $595. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.

When did the logset forwarder range come out?

The forwarder range was completed with the Logset 4F in 1998 and the Logset 5F in 1999. Logset’s harvester range was incomplete, as there were forwarders of all shapes and sizes, but only one Logset 506H harvester. Logset started to sketch a new harvester concept and the first Logset 8H Titan was presented in 2000 at the Finnish Metko fair.

What kind of control system does logset use?

During the past years Logset has developed a new generation of the control system for both forwarders and harvesters: Total Operation and Control 2 (TOC 2). In addition to the renewed TOC 2 for the base machine, Logset has also developed a new measuring system for the harvester head: Total Operation and Control – Measuring Device 2 (TOC-MD 2).

When did the logset 8H Titan come out?

Logset started to sketch a new harvester concept and the first Logset 8H Titan was presented in 2000 at the Finnish Metko fair. During the 2000’s Logset grew on all fronts. The volumes increased and suddenly Logset was a company making 100 machines a year instead of 30-40. 2004 Logset introduced Logset 4H Titan and Logset 5H Titan.

How many harvesters are in a logset machine?

Now the Logset machine range contains seven forwarders, seven harvesters and seven harvester heads. During the past years Logset has developed a new generation of the control system for both forwarders and harvesters: Total Operation and Control 2 (TOC 2).