How do I get to HP Array Configuration Utility?

Charlotte SmithLifehacks

How do I get to HP Array Configuration Utility? To access ACU, use one of the following methods: If an optional controller is not installed, press F10 during boot. If an optional controller is installed,

How do I get to HP Array Configuration Utility?

To access ACU, use one of the following methods:

  1. If an optional controller is not installed, press F10 during boot.
  2. If an optional controller is installed, when the system recognizes the controller during POST, press F5.

How do I enable RAID on HP?

When the computer turns on, before Windows opens, press the F10 key repeatedly. The BIOS opens. Select the Advanced tab, and then click System Options. Under System Options, select Configure Storage Controller for RAID and POST Prompt for RAID Configuration.

Where is RAID configuration in Linux?

How to Check Your Current RAID Configuration in a Linux-based System

  1. md1 = Name of RAID array.
  2. active = RAID is active.
  3. raid1 = Type of RAID.
  4. sdb2 and sda2 = Devices associated with this RAID array.
  5. [1] and [0] = RAID role numbers within that array, for each device.

How do I find RAID configuration?

How to Guide: Checking if a RAID is configured

  1. Rick click on the “computer” icon on the desktop.
  2. Select Manage.
  3. Expand Storage.
  4. Click Disk Management.
  5. In the bottom center pane you’ll see different Disk numbers.
  6. Under the Disk number you’ll see either Basic or Dynamic.

How do I open the HP Smart Storage Administrator?

On the local server (host), click Start, and then select Programs; Windows System; Smart Storage Administrator; Smart Storage Administrator Preferences.

What is RAID configuration?

A Random Array of Independent Disks (RAID) is a set of multiple drives put together with the purpose of improving a single drives performance. Some RAID configurations provide a speed boost while others provide data protection in the event of failed drives.

How to get to raid on HP ProLiant dl380 G7?

When the HP Proliant DL380 G7 boots up the only displayed BIOS options are F9 for Setup, F11 for the boot disk menu, but neither other these take you to the RAID setup. To get to the RAID setup options, when the screen appears showing the F9 and F11 options press F8 every second or so, and you’ll first get the ILO configuration.

Which is drive bay 1 in HPE ProLiant dl380 Gen9?

Drive bay 1 is empty 8SFF drive cage installed in bay 1 and 2 SFF drives in the front of the server Host Bus Adapter and Controller cabling HPE H240 Smart Host Bus Adapter/Smart Array P440 Controller cabling HPE Smart Array P840 Controller cabling

How to install a ProLiant dl380 Gen9 server?

Operations Power up the server Power down the server Extend the server from the rack Remove the server from the rack Remove the access panel Install the access panel Accessing the rear panel Opening the cable management arm Remove the fan cage Remove the hot-plug fan Remove the PCI riser cage Install the PCI riser cage

How to access the raid settings on a HP ProLiant?

To get to the RAID setup options, when the screen appears showing the F9 and F11 options press F8 every second or so, and you’ll first get the ILO configuration. Exit ILO, and next you’ll get the RAID configuration options. I found this tip mentioned in this post on the HP forums here.