How do you reset the security system on a 2003 Pontiac Grand Am?

How do you reset the security system on a 2003 Pontiac Grand Am?

Turn the ignition key to the “Off” position for 10 seconds. 3. Repeat this process 3 times. This should reset the Security light/system and allow you to start your car.

How do I get my Pontiac out of theft mode?

The keyless entry remote and the ignition key are required to reset the anti-theft system.

1. Exit the vehicle and stand next to the driver’s side front door.
2. Press and hold the lock and unlock buttons on the keyless entry remote until the horn honks once and the lights flash briefly.

How do I reset my Grand Am?

How to Reset the Service Engine Soon Light on a Grand Am

1. Turn the ignition switch on without starting the engine.
2. Press the “Options” button on the instrument panel until the service light is displayed.
3. Press the “Set/Reset” button to open the reset confirmation screen. Turn the ignition switch off.

How do you start a Pontiac Grand Am without a key?

How can I start my car without the ignition key? Remove the screws that are holding the electrical part (the part with the wires) and the mechanical part of the ignition switch together. Insert a flat-head screwdriver into the key hole and turn in the same direction as you would your key . This will start your car .

How do I reset my Pontiac security system?

Turn the ignition key to the “Run” position after two to three seconds. Leave the key in this position for 10 minutes. Start the engine as soon as the security light stops flashing and remains on. The Passlock system resets and the engine starts normally.

How can I bypass PassLock?

Thankfully this is an easy fix.

1. Leave the ignition key turned to the “On” position after the vehicle has stalled and will not start.
2. Look at the dashboard and locate the theft system light.
3. Turn the ignition to the “Off” position to disable the PassLock system, and wait for 20 seconds for the system to reset.