What is side chain EQ? The signal a compressor listens to and analyses to dynamically control its gain adjustment circuit is called the sidechain. Like any signal, the sidechain can be processed using EQ, effects
What is side chain EQ?
The signal a compressor listens to and analyses to dynamically control its gain adjustment circuit is called the sidechain. Like any signal, the sidechain can be processed using EQ, effects and audio editing, and doing so dramatically alters the response of the compressor.
What is side chain processing?
Sidechaining is all about interaction between a signal processor and an audio source (usually one that’s different from the audio that’s being processed). Audio for video — Use sidechaining to reduce the level of a music bed during narration.
What is a side chain input?
A sidechain (also seen as side chain or side-chain) input is a special ‘key input’ found on audio compressor units and noise gate units. It’s an additional input, separate to the main input found on the device.
Why do bass and side chains kick?
Sidechain Compression Is The Solution The idea behind sidechain compression is that you briefly lower the volume of your bass part whenever the kick drum comes in. That gets the bass out of the way for just long enough to hear at least the attack of the kick drum clearly.
What does parallel compression do?
Parallel compression, also known as New York compression, is a dynamic range compression technique used in sound recording and mixing. Rather than lowering the highest peaks for the purpose of dynamic range reduction, it decreases the dynamic range by raising up the softest sounds, adding audible detail.
Can you sidechain an EQ?
A dynamic EQ allows you to set a curve that reacts only to changes within a specified frequency range. This way, you can still send the kick drum as a sidechain trigger, but have it duck just the masking bass frequencies and nothing else.
What is a sidechain effect?
Sidechain is an effect that you have on one sound that is triggered by the level of another sound. The classic example is when you have a compressor on a bass track and you set it so it ducks the level of the bass whenever a kick drum hits.
What should I side chain?
Other Sidechain Compression Techniques
- Duck the Snare in the Overheads. This is another very useful sidechain compressor trick.
- Duck the Guitar from the Vocals. This is a simple effect to set up.
- Make Your Own De-Esser.
- Create Maximum Room for the Vocals.
- Noise Gate Sidechain: Add a Sine Wave to a Kick.
Can a sidechain be used as a dynamic EQ?
So you try again with a sidechain compressor that ducks the bass whenever the kick lands, but this reduces the entire bass signal and produces an obvious pumping effect you don’t want. I think a more transparent solution is to use a dynamic EQ like the one in Neutron.
Can a side chain turn down a kick drum signal?
I use the side-chain to turn down the signal of the Moog based on the bang, punch or amplitude of the kick drum. Without the C1 side-chain functionality, the two low-end frequencies can become sonic enemies. ” “ This compressor does great soft-knee compression and does wonders as an expander.
When to set kick sidechain to 100 Hz?
If the overlap between the kick and bass is happening between 40–80 Hz, there’s no need to set your kick sidechain to squash everything below 100 Hz when it lands.
How does Dynamic EQ work on a kick drum?
A dynamic EQ allows you to set a curve that reacts only to changes within a specified frequency range. This way, you can still send the kick drum as a sidechain trigger, but have it duck just the masking bass frequencies and nothing else.