What is a fleetside pickup bed?

What is a fleetside pickup bed?

Fleetside:This is the most common type of truck bed out there and the name chosen by Chevy, GMC, Dodge, and just about everyone else. The sides of the bed are flat, and the wheel arches that accommodate the tires are inside the bed. This simplifies manufacturing and maximizes the amount of “stuff” than can be hauled.

Was there a fleetside Chevy pickup made?

This became a precursor to the “Fleetside” pickup Chevy introduced in 1958. Now the bed tied into the stamped sheetmetal body sides much like the Cameo, but with a wider bed. Not only was the truck more attractive but it had a practical advantage, too.

What is a fleetside Silverado?

The Chevrolet Fleetside pickup truck has a slabsided cargo box in which the width of the box extends over the rear wheels, allowing the box more cargo space. Although Chevrolet dubbed these trucks as Fleetsides, the name has since become a generic term for all pickups with the same styling.

What is a fleetside bed Tacoma?

Fleetside: This is the ‘standard’ pickup bed style at GM, Dodge and most import brands. The exterior of the bed is flat while the wheel well arches are contained within the bed. These are available in short- and long-box versions, the latter offering significantly more cargo-carrying capacity.

How wide is a pick up bed?

The width of the pickup truck bed will vary by model, but also by the length. Generally speaking, the longer the truck bed, the wider it will be. Pickup truck beds typically fall between 49″ and 65.”

How do I know what size my truck bed is?

How To Measure Your Truck Bed

1. Place your measuring tape at the bulkhead of your truck bed.
2. Moving along your bed rail, extend the measuring tape to the inside edge of the top of your tailgate. Record the measurement in inches.
3. Divide the number of inches by 12 to determine the length of your truck bed in feet.

Are Stepside beds smaller?

typically the stepside is narrower than the standard bed.

What is a style side bed?

Standard beds are a flat rectangular box that simply extends back behind the truck. For example, the regular bed configuration on a Ford truck is called a Styleside bed, while on Chevy trucks its called a Fleetside.

How wide is a full size pickup?

Specifications as Tested

General
Overall length (in.)	212.4	231.9
Overall width (in.)	76.7	79.9
Height (in.)	72.2	77.2
Track f/r (in.)	65.9/65.9	67.6/67.6

What are the different truck bed sizes?

For the most part, there are usually three different bed sizes for pickup trucks: short, standard and long.

How do you measure a bed for a tonneau cover?

Extend your measuring tape along the floor of the bed to the bulkhead wall (right behind the cab) Take your measurement at the end of the floor of the bed where the gap is located. Divide by 12 to convert your measurement from inches to feet (this is usually how tonneau covers will be listed)

What does Fleetside bed mean?

fleetside(Noun) A pickup truck having flat bedsides (outside quarter panels). The rear quarter panels are flat and run lengthways along the wheel-well openings. Excludes both stepside and styleside truck bed styles.

How long is a pickup truck bed?

Beds/Box Sizes. Generally there are 3 different sizes for pickup truck beds. Short, Standard, or Long. Generally a short bed is approximately 5’8” long, a standard bed is 6’5” long, and a long bed is 8’ long but these numbers vary by a few inches from manufacturer to manufacturer.

What is a pickup truck bed?

The pickup “bed” or “box” (the two terms are interchangeable) is the rectangular open area behind the cab which is used for cargo-carrying. The bed is always defined by its length, measured on the inside of the bed from the front inside wall to the inside of the tailgate.

What is a Styleside bed?

Fleetside is a bed that has flat sides. Styleside is a bed that has steps on the bed before and after the wheel well. If pictures are needed, give me the year, make, model.